Suppose you have a parallel plate capacitor with a capacitance of $16 \text{ mF}$. You connect it to a 15-Volt battery and leave it to charge. After a while, you suddenly double the area of the plates and wait for another while. What is the energy stored in the capacitor? What would be the energy stored if you had disconnected the capacitor before doubling the area?

• Originally, the capacitor has capacitance $C = 16 \text{ mF}$.
• The battery has $\Delta V_{battery}=15 \text{ V}$.
• The capacitor is a parallel plate capacitor.
• The area of the plates is doubled.
• The capacitor is either connected always or disconnected before changing the area (two cases).

• For all situations in the problem statement, energy stored in the capacitor.

• Whenever we measure energy, the capacitor is charged and and there is no longer current in the circuit.
• There is negligible resistance in the circuit, so the voltage across the capacitor is the same as in the battery.
• In the case that we disconnect the capacitor, it does not discharge at all.

• We represent the capacitance of a parallel plate capacitor as

\begin{align*} C = \frac{\epsilon_0 A}{d} &&&&&& (1) \end{align*}

• We represent the capacitance of a capacitor in general as

\begin{align*} C = \frac{Q}{\Delta V} &&&&&& (2) \end{align*}

• We represent the energy stored in a capacitor as

\begin{align*} U=\frac{1}{2}\frac{Q^2}{C} &&&&&& (3) \end{align*}

We assumed that in the capacitor, $\Delta V = \Delta V_{battery} = 15 \text{ V}$. At this point we can find the energy stored in the capacitor before changing its area. All we need to do is rewrite the equation for the energy stored using the general equation for capacitance. We can rearrange equation (2) and sub in an expression for $Q$ in equation (3): $$U = \frac{1}{2} C \Delta V^2$$ We have a capacitance and a potential difference which correspond to the charged capacitor before changing the area. The problem statement didn't ask for this quantity, but it will be useful for comparisons: $$U_{original}=1.8 \text{ mJ}$$ In the first case, we simply double the area of the capacitor without changing anything else.