184_projects:design_defib_24

This is an old revision of the document!


Your team was able to shut down the hawkion accelerator before it could blow itself up, and possibly take Lakeview with it. But the beam dump that absorbed the hawkions is now highly radioactive. You need to put shielding around it before anyone receives too high of a dose, but no one can go near it.

Solomon Tobb, the ingenious intern, suggests using I.A.N. He explains that I.A.N. is an Intelligent Artificial eNtity, a robot, and his systems should withstand the radiation long enough to put the shielding in place. Unfortunately, you used both his primary and backup batteries for emergency power to the accelerator, so his systems are completely shut down.

Melissa Lewis, the team leader, mentioned that in a training video she saw back in the 80's call “Short Circuit 2” a model like I.A.N. was brought back to life using a defibrillator.

There's no defibrillator at FTOE, but using your knowledge of electromagnetism, you know you can create a makeshift piece of equipment to be able to restart I.A.N. You run to the laboratory stock room, and manage to find several sheets of aluminum, various paper sheets, some electrical tape and wires, and a pair of all-purpose scissors.

The defibrillator must be able to deliver 360 J to Johnny 5 in order to stabilize him. Can you fix the instrument and save him?

The paper sheets are 0.5 m wide, 2 m in length, and vary in thickness (2 mm, 1 mm, 500 $\mu$m, 50 $\mu$m, 1 $\mu$m, 0.5 $\mu$m). The aluminum sheets are 0.80 m in length, 0.5 m wide, and 0.3 mm in thickness. The defibrillator has a high voltage power supply of 30 kV.

Learning Goals/Conceptual Questions

  1. Explain why you would want to use a capacitor for a defibrillator? Why would you not just connect the paddles to a battery?
  2. Explain how a capacitor charges and discharges.
  3. Explain why you would add a resistor to charging/discharging capacitor circuit.
  4. Draw the circuit diagram for charging the capacitor. Draw the circuit diagram for discharging the capacitor. Can you draw a single circuit diagram for both charging and discharging using a switch? Where is Johnny 5 in the circuit?
  5. Draw V vs t, Q vs t, and I vs t graphs for both charging and discharging circuits.
  6. Explain what the difference is between a capacitor that is “initially connected” versus one that has been hooked up for “a long time”
  7. Calculate the dimensions/size needed to build a capacitor with the desired capacitance.
  8. Summarize equations that we know for both resistors and now capacitors.
  9. Explain what changes about your capacitor when you have a dielectric
  • 184_projects/design_defib_24.1706559381.txt.gz
  • Last modified: 2024/01/29 20:16
  • by tdeyoung