Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ===== Project 5 ===== ==== Project 5A: Mini-Particle Accelerator ==== S.P.A.R.T.A.N force, still trapped in the town of Lakeview, has been sent as part of a larger governmental team to work on developing a micro-particle accelerator on the outskirts of town. Why does a town the size of Lakeview need a micro-particle accelerator? You are not at liberty to say. Your team is tasked with modeling the initial part of the accelerator, which uses a constant electric field to accelerate the charges. The concept is that the particles will enter a tube that is encapsulated by rings of charge. Your team needs to demonstrate that this concept will produce a __constant__ electric field. === Part 1: === The first bit of code that you have received is from the previous team who were able to construct a single ring of charge and show the electric field due to that ring at some point. Your team should construct the electric field vectors for a circle inside the accelerator (smaller than the ring) at a distance of a few centimeters from the ring face. <code> GlowScript 2.7 VPython #Set up constants R = 0.02 r_obs = 0.05 Q = 1e-9 N = 20 dq = Q/N scale=1e-4 oofpez = 9e9 #1/(4pi epsilon_0) in N m^2/C^2 #Defining a ring at the origin myring = ring(pos = vector(0,0,0), radius = R, axis = vector(0,0,1), color = color.blue, thickness = 0.02*R) #Create an empty list for the charges ChargeList=[] #Set up the step size and angle for creating the charges dtheta = 2*pi/N theta = dtheta/2 #Create charges in a circle and add them to the ChargeList while theta < 2*pi: rpiece = R*vector(cos(theta),sin(theta),0) #location of piece particle = sphere(pos = rpiece, radius = R/20, color = color.yellow) ChargeList.append(particle) theta = theta + dtheta #Create an empty list for the observation points ObsList = [] #Set up the step size and angle for creating the observation points phi = 0 dphi = pi/4 #Create observation points in a circle and add them to the ObsList while phi < 2*pi: r_obs_piece = r_obs*vector(cos(phi),sin(phi),1) #location of piece obs_particle = sphere(pos = r_obs_piece, radius = R/20, color = color.red) ObsList.append(obs_particle) phi = phi + dphi #Find the electric field at each observation point for obs_point in ObsList: for charge in ChargeList: Enet=vec(0,0,0) </code> === Part 2 === After you got this initial code working, your team was able to construct a model of a tube consisting of multiple rings, all with the same charge. But, the field doesn't look quite right - it's not constant as expected. Your bosses seem to think the field can be made constant in the tube, so it's up to you to figure out how. <code> num_points = 10 num_rings = 11 N = 11 spacing = 0.02 # Set some constants and stuff R=0.02 #radius of ring in m ax = vector(0,0,1) # simplify things Q=1e-9 #charge of ring in C oofpez=9e9 #1/(4pi epsilon_0) in N m^2/C^2 #draw axis zaxis=cylinder(pos=-2*R*ax, radius=0.015*R, axis=4*R*ax, color=color.black) #draw points points = [] for i in range(num_points): xr = 0.01*sin(i*2*pi/num_points) yr = 0.01*cos(i*2*pi/num_points) points.append(sphere(pos=vector(xr,yr,0.01), color=color.red, radius=5*zaxis.radius)) #make and draw rings rings = [] ring_charge = [Q,Q,Q,Q,Q,Q,Q,Q,Q,Q,Q] for i in range(num_rings): loc = i - (num_rings)//2 rings.append(ring(pos=vector(0,0,spacing*loc), radius=R, axis=ax, color=color.blue, thickness=0.02*R)) # Find net field for apoint in points: Enet = vector(0,0,0) for i in range(len(rings)): aring = rings[i] # look at one ring dq = ring_charge[i]/N #charge of a piece dtheta = 2*pi/N #theta increment for our loop theta=dtheta/2 #initial theta for first piece of loop Ering = vector(0,0,0) #net electric field for single ring rpoint = apoint.pos scale=1.2*mag(rpoint)/8000 #used to scale the arrows representing E-field while theta<2*pi: rpiece = R*vector(cos(theta),sin(theta),aring.pos.z/R) #location of piece r = rpoint-rpiece #vector from piece to point in space rmag = mag(r) #magnitude of r rhat = norm(r) #unit vector for r dE = oofpez * dq / rmag / rmag * rhat # Electric field of peice of ring Enet = Enet + dE particle=sphere(pos=rpiece, radius=apoint.radius, color=color.yellow) #draw a particlee theta=theta+dtheta Evector=arrow(pos=rpoint, axis=scale*Enet, color=color.orange, shaftwidth=apoint.radius/2) </code> /* ==== Project 5A: Maverick and JPL ==== {{184_notes:warninglight.jpeg}} Outside of the town of Lakeview work is being completed on the Artemis 13 spacecraft. Another engineering and science task force titled T.R.O.J.A.N force are working with The Jet Propulsion Laboratory (JPL) Division of NASA testing a new and highly experimental spacecraft capable of in atmosphere flight as well as outer orbit maneuvering (Artemis 13). Lieutenant Pete "Maverick" Mitchell has been testing the new spacecraft now for a few weeks, and has had continuous issues with the warning light for power delivery failure to the stabilizers on the wings. {{ 184_notes:6b_opencircuit.png?300}} Maverick is convinced that the time between when the problem happens and when the warning light comes on is way too long, and this delay in relaying the warning to him could lead to a very problematic incident in the future. He does not want to lose another co-pilot like Goose. You have been given the task of explaining to Maverick why this could not be the case, and your boss, Clint Howard, has given you the following circuit diagram to try and aid you in your explanation to Maverick. The circuit diagram at this time does not include the warning light. Maverick likes numbers, so part of your explanation should also include a calculation of the amount of time it takes the light to come on when the length of the wire in the circuit between the stabilizer control module switch and the warning light in the cockpit is 5.2$m$ distance. He should also understand what the electric field looks like in this circuit, and why it means that his original presumptions about the warning light "taking too long" cannot be correct. You should also correct this circuit diagram to include the warning light so that your boss has a more accurate circuit diagram to show people. <WRAP info> === Learning Goals === * Explain what happens to the surface charges and electric field in a circuit when wires are initially connected. * Explain why current starts to flow almost instantaneously (or rather why a lightbulb turns on immediately after to flip the switch). * Explain why a lightbulb would not turn on if it were only connected to the positive end of the battery. * Explain the role of the battery in lighting up the lightbulb. </WRAP> */ /* ==== Project 5B: Group Project TBD ==== */ 184_projects/f21_project_5.txt Last modified: 2021/09/29 14:03by dmcpadden